33" Frameless Vertical Post System.

Used to stabilize fixed panels of glass not reaching the ceiling, and provide an excellent alternative to customers not wanting to use the more traditional horizontal Header Systems that run across the entire width of the enclosure.


Four Popular Stock Finishes For 5/16", 3/8", and 1/2" (8, 10, and 12 mm) Glass

Glass Fabrication Required for Tube Adaptors/End Caps [3/4" (19 mm) Holes]

Custom Kits Available in Various Finishes, Post Configurations, and with Dome or Ball Style Glue-In End Caps (Two-Point System Only)

Other colors and configurations upon request

Catalog Number: VPK33

Hinge Style Knobs & Handles
Glass Types Glass Protectant

These Fixed Panel Support Bars stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling.

The Glass - Ceiling Bar has a bell-shaped clamping device at the ceiling and a solid brass end cap with a U-shaped receptacle to secure the fixed glass panel.

Nylon-tipped set screws secure the glass and prevent glass-to-metal contact.

Bars are available in three lengths, and in sizes to secure 3/8" to 1/2" thick glass. Bar is cuttable to fit length required.

Finishes are available to match most of our hinges, knobs, and pull handles.

The bar is rounded tubular.

No holes or cut-outs are required in the glass.

May be Used as an Alternative to Header Kits to Secure Fixed Panels and Provide Safety

Chrome, Brushed Nickel, Matte Black, Brass

Prices for 1/4" glass and other colors available upon request

Catalog Number: S1+S3+S910 for 3/8"

Shower Support Bar Ceiling to Glass
Length 39” (990mm). Cuttable to any length shorter.
3/4''(19mm) Diameter Tubular Brass
Solid Brass End Caps
Chrome Brushed Nickel Matte Black Satin Brass

Catalog Number: SBC

Wall to Glass Adjustable Support Bar
3/4''(19mm) Diameter Tubular Brass
Fits 3/8" (10mm) or 1/2"(12mm) glass
Solid Brass End Caps
Length 970mm-1150mm (38"-45")
Chrome Brushed Nickel Matte Black Satin Brass

Catalog Number: SBWADJ

Our new Square Support Bar complements many square corner style hinges.

The Bar stabilizes fixed panels of glass in enclosures that do not go to the ceiling.

After ordering the Bar itself, choose from a number of various Fittings to complete the desired application. The Fittings come with nylon-tipped set screws that secure the glass and prevent metal-to-metal contact.

Finishes are available to match many popular decors. No holes or cut-outs are required in the glass.

Glass Thickness: 5/16"-1/4"(8-6mm), and 1/2"-3/8" (12-10mm)

Catalog Number: SQ Wall and Ceiling Mount Support Bar

These Fixed Panel Support Bars stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling.

The Wall-to-Glass Bar has a bell-shaped clamping device on the wall side, and a solid brass end cap with a swiveling U-shaped receptacle to secure the fixed glass panel.

Nylon-tipped set screws secure the glass and prevent glass-to-metal contact.

Finishes are available to match most of our hinges, knobs, and pull handles.

No holes or cut-outs are required in the glass.

May be Used as an Alternative to Header Kits to Secure Fixed Panels and Provide Safety

Fits either 1/4" - 5/16" or 3/8" - 1/2" glass for 39" or 51" lengths cuttable to required size

Prices for other colors upon request

Catalog Number: SUP06; SUP10

These Fixed Panel Support Bars stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling.

The Wall-to-Glass Bar uses a mitred 22.5 or 45 degree wall bracket and a solid brass end cap with a swiveling U-shaped receptacle to secure the fixed glass panel.

Nylon-tipped set screws secure the glass and prevent glass-to-metal contact.

Bars are available in two lengths 39" or 51", and in sizes to secure 1/4" to 1/2" thick glass.

Finishes are available to match most of our hinges, knobs, and pull handles.

No holes or cut-outs are required in the glass.

May be Used as an Alternative to Header Kits to Secure Fixed Panels and Provide Safety

Prices for other colors upon request

Catalog Number: S1+S5+SBB45

The Through-Glass Mounted Support Bar creates a means of support that strengthens an enclosure's structural integrity of shower enclosure.

Choice of Wall (GTW)or Glass-to-Glass (GTG) Mount

Stocked in Numerous Finishes, with Custom Finishes Available

39" Bar Length, 42-5/8" Overall Length with fittings

All Mounting Hardware Included

Catalog Number: SUP135

Hinge Style Knobs & Handles
Glass Types Glass Protectant

These Fixed Panel Support Bars stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling.

The Glass-to-Glass Bar has solid brass end caps with swiveling U-shaped receptacles on both ends to secure each fixed panel.

Nylon-tipped set screws secure the glass and prevent glass-to-metal contact.

Bars are available in two lengths, and in sizes to secure 1/4" to 1/2" thick glass.

Finishes are available to match most of our hinges, knobs, and pull handles.

No holes or cut-outs are required in the glass.

May be Used as an Alternative to Header Kits to Secure Fixed Panels and Provide Safety

Prices for 3/8 - 1/2" glass 39" long:

Chrome, Brushed Nickel, Brass

Prices for other colors upon request

These Fixed Panel Support Bars stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling.

The Glass-to-Glass Bar has solid brass end caps with swiveling U-shaped receptacles on both ends to secure each fixed panel.

Nylon-tipped set screws secure the glass and prevent glass-to-metal contact.

Bars are available in two lengths, and in sizes to secure 1/4" to 1/2" thick glass.

Finishes are available to match most of our hinges, knobs, and pull handles.

No holes or cut-outs are required in the glass.

May be Used as an Alternative to Header Kits to Secure Fixed Panels and Provide Safety

39" and 51" long bars available

Chrome, Brushed Nickel, Brass

Prices for other colors upon request

Catalog Number: SUP26 or SUP20

Hinge Style Knobs & Handles
Glass Types Glass Protectant

92" Frameless Vertical Post System.

Used to stabilize fixed panels of glass not going to the ceiling, and provide an excellent alternative to customers not wanting to use the more traditional horizontal header systems that run across the entire width of the enclosure.


Four Popular Stock Finishes:
Polished Stainless, Brushed Stainless, Brass, Oil Rubbed Bronze

Glass Thickness supported 5/16", 3/8", and 1/2" Glass

Glass Fabrication Required for Tube Adaptors/End Caps [3/4" Holes]

Pricing for other colors upon request

Catalog Number: VPK92

Hinge Style Knobs & Handles
Glass Types Glass Protectant

These Fixed Panel Support Bars stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling.

The Wall-to-Glass Bar has a bell-shaped clamping device on the wall side, and a solid brass end cap with a swiveling U-shaped receptacle to secure the fixed glass panel.

Nylon-tipped set screws secure the glass and prevent glass-to-metal contact.

Bars are available in two lengths, and in sizes to secure 1/4" to 1/2" thick glass.

Finishes are available to match most of our hinges, knobs, and pull handles.

No holes or cut-outs are required in the glass.

May be Used as an Alternative to Header Kits to Secure Fixed Panels and Provide Safety

Prices for 3/8" - 1/2" glass for 39" length:

Chrome, Brushed Nickel, Brass

Prices for other colors upon request